Heat loss
Heat is the energy that is transferred between different systems as a result of thermodynamic interactions.
Heat loss is a measure of negative heat transfer through a building’s fabric from the inside to the outside. This can be due to either convection, conduction, radiation, mass transfer, or a combination. The colder the outside temperature, the warmer the inside, and the worse the thermal insulation of the building fabric, the greater the heat loss will be.
Heat loss is typically measured in either kilowatts (kW) or British Thermal Units (BTUs).
U-values (sometimes referred to as heat transfer coefficients or thermal transmittances) are used to measure how effective elements of a building's fabric are at insulating against heat loss (or heat gain). The lower the U-value of an element of a building's fabric, the more slowly heat is able to transmit through it, and so the better it performs as an insulator. Very broadly, the better (i.e. lower) the U-value of a building's fabric, the less energy is required to maintain comfortable conditions inside the building.
The building regulations require that reasonable provision be made to limit heat gains and losses through the fabric of new buildings and works to existing buildings. The approved documents to the buildings regulations set out the limiting standards for the properties of the fabric elements of the building, described in terms of maximum U-values. For more information see: Limiting fabric standards.
Typically, the older a building is, the more it will be susceptible to heat loss. This can be due to a combination of poor (or no) insulation, thermal bridging across the building envelope, single glazing, poor airtightness and so on,
Levels of heat loss will vary depending on the type of building; for example, a terraced house will lose a higher proportion of heat through the floor and roof rather than walls, whilst nearly all the heat loss from a flat will be through the outside walls.
The following estimates indicate the proportionate heat loss from a badly insulated house:
- Up to 25% through the roof.
- Up to 35% through outside walls.
- Up to 25% through doors and windows.
- Up to 15% through ground floors.
(Ref. www.ired.co.uk)
Some of the techniques that can be used to combat heat loss in existing buildings include:
- Draught-proofing.
- Roof insulation.
- Double-glazing.
- Floor insulation.
- Solid wall insulation.
[edit] Related articles on Designing Buildings
- Building performance.
- Emissivity.
- Heat gain.
- Heat pumps and heat waves: How overheating complicates ending gas in the UK.
- Heat transfer.
- Mean radiant temperature.
- Passive building design.
- The cavity wall real performance question.
- Thermal insulation for buildings.
- Thermal mass.
- Thermal resistance.
- U value.
- Vapour barrier.
Featured articles and news
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.